Friend Engineering Works
Palghar, Mumbai, Maharashtra
GST No. 27AJCPP4119Q1ZQ
View Mobile No.
Send E-mail
- Home
- »
- Our Products
- »
- HR Slitting Machine
| Minimum Order Quantity | 1 Unit |
| Material | Mild Steel |
| Capacity | Upto 12.0 mm |
| Production Capacity | 10-150 Ton/Day |
| Power Consumption | 125-200 HP |
| Max. Coil Weight | 35 Tons |
| Grade | Automatic Mode |
| Speed Line | Upto 100 meter per minutes |
| Width | 200 -2000 mm |
We are offering HR Metal Slitting Line Machine to our clients.Friend Engineering Works offer the proposed Slitting Machine or Slitting Line ( CR/HR ) on High Speed Medium Speed as per customer requirement. All the Electronics controls are operated by Control Panel and PLC System Highly Automated is Provides.The proposed Slitting Machine will function as a constant speed type. In the beginning, the coil is loaded on the coil car by E.O.T. crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.
Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car trolley through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.
Min and Max will capacity : 0.5 Ton - 30 Ton
Min and Max Width (in mm) : 550mm up to 2000mm
Min and Max Thickness (in mm) : 0.3mm up to 12mm
Speed of the machine (m/min) : 0-20-60-80-100-120-140 m/min
Raw Material Used : HR/CR/SS/GP/Color Conted
Automation Level : Manual -Semi-Fully Automated
| Brand | FEW/SL/03 |
| Power Consumption | 10-300 HP |
| Material | MS/SS/COPPER-BRASS |
| Thickness Range | 0.3 to 20.0 mm |
| Loading Weight | Up to 35 tons |
| Width Range | 300 to 2500 mm |
We are offering HR Slitting Line Machine to our clients.Friend Engineering Works offer the proposed Slitting Machine or Slitting Line ( CR/HR ) on High Speed Medium Speed as per customer requirement. All the Electronics controls are operated by Control Panel and PLC System Highly Automated is Provides.The proposed Slitting Machine will function as a constant speed type. In the beginning, the coil is loaded on the coil car by E.O.T. crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.
Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car trolley through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.
Range of Manufacturing and Specifications of CR-HR Slitting Machine
Min and Max will capacity 0.5 Ton - 30 Ton
Min and Max Width (in mm) 550mm up to 2000mm
Min and Max Thickness (in mm) 0.3mm up to 12mm
Speed of the machine (m/min) 0-20-60-80-100-120-140 m/min
Raw Material Used HR/CR/SS/GP/Color Conted
Automation Level Manual -Semi-Fully Automated
| Minimum Order Quantity | 1 Piece |
| Brand | FEW/HG-SL |
| Material | MS,EN24 Shaft |
| Power Consumption | Upto 400HP |
| Production Capacity | 300 TON/Day |
| Coil Thickness | Upto 12 mm |
| Coil Weight | Upto 40 Ton |
| Width | 2000 mm |
| Automation Grade | Automatic |
We are offering Heavy gauge Slitting Line Machine to our clients.In the beginning, the coil is loaded on the coil car by E.O.T. crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.
Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car trolley through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.
Range of Manufacturing and Specifications of CR-HR Slitting Machine :
Min and Max load capacity : 0.5 Ton - 40 Ton
Min and Max Width (in mm) : 300mm up to 2000mm
Min and Max Thickness (in mm) : 0.3mm up to 16mm
Speed of the machine (m/min) : 0-20-60-80-100-120-140 m/min
Raw Material Used : HR/CR/SS/GP/Color Conted
Automation Level : Manual -Semi-Fully Automated